Renix CPS Advance Mod
Sat Apr 07, 2018 5:14 pm
Renix CPS Advance Mod
The sensor portion of the CPS needs to slide up the perforated bar towards the top of the engine.
Mark the perforated bar’s top end with paint or marker.
Place the CPS in a vice, just not quite clamping the bar, the sensor resting on the vice jaws, with the Top part protruding.
Place a bolt that fits tightly into the hole at the Top part of the bar.
With a hammer, tap the Top part of the bar and it will slide through the sensor portion of the CPS. Stop when the sensor portion is about 3/8″ from the edge of the bolt hole.
The sensor portion of the CPS needs to slide up the perforated bar towards the top of the engine.
Mark the perforated bar’s top end with paint or marker.
Place the CPS in a vice, just not quite clamping the bar, the sensor resting on the vice jaws, with the Top part protruding.
Place a bolt that fits tightly into the hole at the Top part of the bar.
With a hammer, tap the Top part of the bar and it will slide through the sensor portion of the CPS. Stop when the sensor portion is about 3/8″ from the edge of the bolt hole.
Permissions in this forum:
You cannot reply to topics in this forum
|
|